P-105TT CFA PILING RIG

Llamada piling machine model P-105TT, for the execution of continuous flight auger piles (CFA) or displacement piles of maximum 24m depth and diameters between Ø350mm and Ø1.000mm.

1. Chasis Llamada
• Llamada hydraulically variable gauge tracks chassis : 2.980 mm to 4.320 mm
• Track length : 4.930 mm
• Track shoes width : 800 mm
• Ground pressure : 1,67 kg/cm2
• Translation speed : 1,30 km/h
• Working area : 360º

2. Transport dimensions
• Wide : 2.980 mm
• Long : 14.100 mm
• High : 3.375 mm
• Transport Weight : 48.000 kg

3. Telescopic counterweight 
• Travel : 1.100 mm
• Total weight : 7.000 kg

4. Hydraulic group
• Motor Caterpillar C7.1, 186 kW. (249 CV) a 2.200 r.p.m. TIER FASE V
• Motor Caterpillar C7.1, 168 kW. (225 CV) a 2.200 r.p.m. TIER III

4.1. Main pumps
4.1a. Close circuit (rotary table)

4.1b. Open circuit

4.1c. Regeneration pump

5. Winches
5.1. Main winch
• First layer output : 11,9 T (x 4 = 47,6 T)
• Max. speed : 32 m/min.(32/4 = 8 m/min)
5.2. Secondary winch
• First layer output : 3,5 T
• Max. speed : 63 m/min
5.3. Automatic CROWN winch
• First layer output : 3 Tm

6. Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back
• Open mast top height : 27,66 m.
• Closed mast top Leigh : 21,36 m.
• Pile top depth : CFA 24m.

7. Cabin equipment
• Extensive cabin equipped with an ergonomic seat, very comfortable & adjustable, with excellent 360º visibility.
• Light inside.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16228.

8. Llamada Rotary head
Llamada type P-105TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor: 
• 4 x Poclain dual displacement motor.
• Speed and torque selection, automatic or manual.
• Switch limit.
• Torque 130 KNm
• RPM de 0 a 25

*The manufacturer reserves the right to modify the technical characteristics of its products.