P-135Ev2 CFA, SECANT AND DISPLACEMENT PILING RIG

Llamada piling machine model P-135EV2, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 27 m. depth, with diameters between Ø400mm and Ø1.200mm.

1. Chasis Llamada
• Llamada hydraulically variable gauge tracks chassis : 2.980 mm to 4.320mm
• Track length : 5.350 mm
• Track shoes width : 800 mm
• Working area : 260º

2. Transport dimensions
• Wide : 2.980 mm
• Long : 18.560 mm
• High : 3.520 mm
• Transport Weight : 60.000 kg (without counterweight): 75.000 kg (with counterweight)

3. Telescopic counterweight. 
• Travel : 1.320 mm
• Detachable weight : 15.000 kg

4. Hydraulic group
– Motor VOLVO TAD1375 405kw. TIER IV FINAL
– Motor Deutz TCD 2015 V8, 400 kW (544 CV) TIER III

4.1. Main pumps
4.1a. Close circuit (rotary table)

4.1b. Open circuit

4.1c. Regeneration pump

5. Winches
5.1.- Main winch
• First layer output : 26 Tm (x 4 = 104 Tm)
5.2. Auxiliary winch
• First layer output : 6,8 Tm.
5.3. Automatic CROWD winch
• First layer output : 10 Tm (with two falls 15 x 2 = 30Tm).

6. Rigid mast
• Equipped with “Tilting mast” system on the mast. Strocke 430mm.
• Frontal, lateral and back inclination
• Mast top height : 31,06 m.
• Pile top depth : CFA 27 m.

7. Cabin equipment
• Remote control via radio all movements if the rig.
• Panoramic vision with panoramic cams 360º.
• Emergency stops, inside and outside.
• FOPS cabin protection according to UNE-EN ISO 3449 Standard.
• Machine securities according to CE EN 16228 Standard.

8. Rotary head 
Llamada type P135 Evolution rotary head with a 5” inner tube for concrete flow (Diameter Ø125mm)

.

*The manufacturer reserves the right to modify the technical characteristics of its products.