P-140TT CFA PILING RIG

Llamada piling machine model P-140TT, for the execution of continuous flight auger piles (CFA) or displacement piles, of maximum 28m depth and diameters between Ø400mm and Ø1000mm.

1. Chasis Llamada
• Llamada hydraulically variable gauge tracks chassis : 2.980 mm to 4.315 mm
• Track length : 5.350 mm
• Track shoes width : 800 mm
• Ground pressure : 1,37 kg/cm2
• Translation Speedy : 1,3 Km/h.
• Working area : 360º

2. Transport dimensions
• Width : 2.980 mm
• Length : 15.620 mm
• Hight : 3.375 mm
• Transport weight with counterweight: 65.000 kg.
– Transport weight without counterweight: 54.800 kg.

3. Telescopique counterweight. 
• Travel : 1.100 mm
• Total weight : 10.200 kg

4. Hydraulic group
– Engine VOLVO TAD1373-VE, 345 kW (463 CV) a 1900 rpm.TIER IV FINAL
– Engine CATERPILLAR C13 328KW (440CV) TIER III

4.1. Main pumps
4.1a. Closed circuit (Rotary table)

4.1b. Open circuit

4.1c. Regeneration pump

5. Winches
5.1. Main winch
• First layer output : 15 Tm (x 4 = 60 Tm)
• Maximum speed : 52 m/min.(52/4 =13 m/min)
5.2. Secondary winch
• First layer output : 5,9 Tm
• Maximum speed : 50 m/min
5.3. Automatic Crowd winch (pull down)
• First layer output : 6 Tm
• Maximum speed : 14 m/min

6. Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back inclination
• Open mast top height : 31.810 0 m
• Closed mast top height : 24.270 mm
• Maximum depth : CFA 28 m

7. Cabin equipment
• Extensive cabin equipped with ergonomic seat
• Very comfortable & adjustable
• Excellent 360º visibility.
• Interior light
• Controls: hydraulic system with load sensing servo control type and proportional control
• Emergency stops, inside and outside
• FOPS cabin protection according to UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16628.

8. Llamada rotary head 
Llamada type P-140TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor: 
• 4 engines dual displacement motor.
• Speed and torque selection, automatic or manual.
• Travel end.
• Torque KNm 20,7
• RPM de 0 a 23

*The manufacturer reserves the right to modify the technical characteristics of its products.