P-160TT CFA

LLAMADA piling machine model P-160TT, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 35 meters depth for diameters between Ø400 mm and Ø1.000 mm., and maximum 33 meters depth for diameters between Ø400 mm and Ø1.200 mm.

1. Chassis Llamada
• Llamada hydraulically variable gauge tracks : 3.500 mm a 5.050 mm.
• Track length : 5.900 mm
• Track shoes width : 800 mm
• Working area : 220º

2. Transport dimensions
• Wide : 3.500 mm
• Long : 18.490 mm
• High : 3.900 mm
• Transport weight : 80.000 kg. (without counterweight): 95.000 kg. (with counterweight)

3. Telescopic counterweight. 
• Stroke : 1.500 mm
• Total weight : 16.500 kg
• Detachable weight : 15.000 kg

4. Hydraulic group
– Engine VOLVO TAD 1671 450KW  (612 CV). TIER IV FINAL
– Engine CATERPILLAR C18, 571 kW (776 CV). TIER III

4.1. Main pumps
4.1a. Close circuit (rotary table)

4.1b. Open circuit

4.1c. Regeneration pump

5.- Winches
5.1.- Main winch
• First layer output : 25,5 Tm (x 5 falls = 127,5 Tm)
5.2.- Secondary winch
• First layer output : 7,9 Tm
5.3.- Automatic Crowd winch
• First layer output : 15 Tm (x 2 falls = 30 Tm).

6.- Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back inclination
• Open mast top height : 39050m.
• Closed mast top height : 31550m.
• Pile top depth :  CFA 35m. (From Ø400 to Ø1000)
CFA 33m. (From Ø400 to Ø1200)

7.- Cabin equipment
• Panoramic vision with cameras 360º vision.
• Remote control via radio for all movements of the rig.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to: UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16228.

8. Llamada Rotary head 
Llamada P-160TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

*The manufacturer reserves the right to modify the technical characteristics of its products.