https://cm-llamada.es/wp-content/uploads/2023/10/P-230TA-EF.pdfP-230TA

LLAMADA drilling rig model P-230TA, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 30 meters depth for diameters between Ø400 mm and Ø1.200 mm.

  1. Chassis Llamada
    • Llamada hydraulically variable gauge tracks : 2.980 mm a 4.320 mm.
    • Track length : 5.350 mm
    • Track shoes width : 800 mm
    • Working area : 360º
  2. Transport dimensions
    • Wide : 2.980 mm
    • Long : 17.380 mm
    • High : 3.690 mm
    • Transport weight : 71.000 kg. (without counterweight): 84.000 kg. (with counterweight)
  3. Telescopic counterweight. 
    • Stroke : 1.500 mm
    • Total weight : 14.000 kg
    • Detachable weight : 13.000 kg
  4. Hydraulic group
    – Engine VOLVO TAD 1385 405KW  (543 CV). TIER V

4.1. Main pumps
4.1a. Close circuit (rotary table)

4.1b. Open circuit

4.1c. Regeneration pump

5.- Winches
5.1.- Main winch
• First layer output : 25,5 Tm (x 4 falls = 102 Tm)
5.2.- Secondary winch
• First layer output : 6,8 Tm
5.3.- Automatic Crowd winch
• First layer output : 15 Tm (x 2 falls = 30 Tm).

6.- Telescopic mast
• Equipped with “Tilting mast” pivotant 400mm stroke.
• Frontal, side and back inclination
• Open mast top height : 34.390m.
• Closed mast top height : 26.890m.
• Pile top depth :  CFA 30m. (From Ø400 to Ø1200)

7.- Cabin equipment
• Panoramic vision with cameras 360º vision.
• Remote control via radio for all movements of the rig.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to: UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16228.

  1. Llamada Rotary head 
    Llamada P-230TA rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Download Brochure pdf

*The manufacturer reserves the right to modify the technical characteristics of its products.

 

<< Back to Drilling Rigs